If you press ESC pending 5 seconds, you will be able to select a boot device. If you choose the Select boot device on startup option, you will see the following message at the virtual machine startup: " Press ESC to select boot device". Remove a boot device from the sequence by clearing the check box next to its name.Change the currently set boot sequence by selecting the name of the corresponding boot device in the Boot Order list and moving it up or down using the arrows to the right of the list.In this pane, you can perform the following operations: If the virtual machine cannot boot from the first device (for example, no media is connected to it), the virtual machine proceeds to the second device in the list and tries to boot from this device, and so on. Note: The virtual machine will use the network adapter specified as Network Adapter 1 in its configuration.Įvery time you start the virtual machine, it tries to boot from the device specified as the first one in the Boot Order list. Select this device if you want your virtual machine to boot from a network adapter using PXE (Pre-Execution Environment). Select this device if you want the virtual machine to boot up from a floppy disk image connected to its virtual floppy disk drive. Once selected, choose the device from the External boot device menu located below. Select this device if you want the virtual machine to boot up from a bootable external device (USB, FireWire, Thunderbolt, etc.) connected to your Mac. Note: The virtual machine will use the CD/DVD-ROM drive specified as CD/DVD-ROM 1 in its configuration. Select this device if you want the virtual machine to boot up from the media connected to its virtual CD/DVD-ROM drive. Select this device if you want the virtual machine to boot up from its virtual hard disk drive. The currently supported boot devices are listed below: In the Virtual Machine Configuration dialog, click Hardware and select Boot Order in the sidebar. Or if the Parallels Desktop menu bar is visible at the top of the screen, choose Actions > Configure.
0 Comments
Leave a Reply. |